Bộ hiển thị điện tử Minebea CSD-581-15/74

Bridge power supply

DC10 V±0.5 V within 120 mA (Changeable to DC2.5 V) with remote sensing applied.

Input range

F.S. setting can be made with the input range from 0.2 mV/V ~ 3.1 mV/V
(Bridge power supply is at DC10 V.)

Zero adjustment range

-0.1 mV/V ~ 2.4 mV/V

Non-linearity

0.01 %F.S.

Temperature efficient

Zero point ±0.4 μV/℃
Sensitivity ±0.003 %F.S./℃

Input noice

±0.3 μVP-Por less

A/D sampling

100 times/s

Load display

Load displayorDisplay of setting

Display range

-1 000 ~ 11 000 (x 2, x 5 and x 10 can be available.)

Condition display

RUN, A/Z, LOCK, HOLD, CHECK

Display times

4 times/s (Changeable to 20 times/s, 50 times/s)

Open collector output function

RUN, ERROR

External control function

ZERO, A/Z, A/Z OFF, HOLD, LOCK, SEL.1, SEL.2

BCD output
(CSD-581-15)

BCD 5 digits, Parallel outpu with polarity (POL)
(Output ON with minus and outputs OFF with plus.)
P.C. (print command), OVR(over), ERROR,
Above are open collector outputs VCE=DC30 V, IC=DC20 mA at Max.

RS-232C interface
(CSD-581-74)

Baud rate : Selectable from 600, 1 200, 2 400,
4 800, 9 600, 19 200 or 38 400 bps
Data bit length : Selectable from 7 bit or 8 bit
Parity bit : Selectable from None, Even or Odd
Stop bit : Selectable from 1 bit or 2 bit
Terminator : CR + LF
Communication method : Half duplex
Synchronous method : Start-stop synchronous method
Communication data : ASCII code
Input/Output monitor with LED
Suitable plug : DE-9S-NR(made by JAE)

Operating temp./humidity range

Temperature -10 ℃ ~ 50 ℃, Humidity 85 %RHor less(Non condensing)

Power supply voltage

Power supply voltage : DC24 V (DC18 V ~ 36 V)
Power consumption Approx.9 W at maximum
(at DC24 V)

Outline dimensions(WxHxD)

220 mm x 130 mm x 25 mm (Excludes protruding parts.)

Weight

Approx. 250 g (without options)