Bộ hiển thị điện tử Minebea DML-802B

Power supply voltage to sensor

Load Cell DC12 V±1.2 V / within 40 mA/unit
Angle detector DC12 V±1.2 V / within 20 mA

Input range

Load cell F.S. setting can be made at the input from 0.5 mV/V to 3 mV/V
Angle detector 1.4 V ~ 5.6 V (-15° ~ 105°)

Display of moment ratio

Display range from 60 % to 125 % (Bar graph LED)
Minimum resolution 2.5 %

Present load display

Display range from -99 t to 999 t or from -9.9 t to 199.9 t

Present working radius

Display range from 0.0 m to 99.9 m

Condition display

Applied load cell is specified. (Load cell No.1 ~ 3)

Monitor display

One of the selection has been displayed either of Limit load, Limit radius, Jib angle, Moment No., Jib No. or Range No.

Limited output monitor display

Display output condition of limited output No.1 to No.6

Display of 90 % and 100 %

Display signal output condition of 90 % and 100 % of the lifting load

Display of up and down

Display input signal condtion for correction executing instruction of lift-up and lift-down

Display times

Changeable to 1 times/s, 2 times/s or 0.5 times/s

Buzer for emergency

Parts No. EB2112 DC12 V, 35 mA

Power supply voltage

DC24 V (DC18 V ~ 36 V), Power consumption Approx. 3 A

Outline dimensions

100 mm(W) x 210 mm(H) x 162.9 mm(D)
(Excluding protruding parts)

Weight

Approx. 2.5 kg

Angle detector Specifications

Rated voltage

DC10.5 V ~ 30 V

Detecting angle

-15° ~ 105°

Output voltage

Sensitivity 35 mV±1.2 mV (per 1° )

Linearity

±1 %F.S.

Current output

4 mA or less

Power consumption

10 mA or less

Weight

Approx. 2 kg (including cable)

Cable

Approx. 15 m (Cable end is cut)