Máy thử kéo nén Minebea Technograph TGI series

Model

TGI-250kN

TGI-100kN

TGI-50kN

TGI-10kN

TGI-5kN

TGI-1kN

TGI-500N

TGI-200N

Maximum test force

250 kN

100 kN

50 kN

10 kN

5 kN

1 kN

500 N

200 N

Test force measure -ment range *1)

0.1N~
250kN

0.1N~
100kN

0.1N~
50kN

0.1N~
10kN

0.1N~
5kN

0.1N~
1kN

0.1N~
500N

0.1N~
200N

Test space

Tensile / compression testing beneath the movable crosshead.
(A model is available allowing tensile testing above the movable crosshead (Optional).)

Loading method

Constant-speed strain loading with highly accurate AC servo motor and backlash-free precise ball screw.

Cross head speed / permissible test force

Within the max. test force over the entire speed ranges.

Test force range

2 methods:
AUTO: (accuracy guranteed for 1/1 to 1/250 of load cell capacity)
100: (accuracy guranteed for 1/100 to 1/1 000 of load cell capacity)

Test force display

5-digits digital display ±99,999
AUTO range: Resolution 1/5000, test force reduction increase/decrease, Full scale display, and automatic switching of decimal point position and display unit.
100 range: Resolution 1/10000
* Test force display varies depending on the load cell provided.

Test force measuring accuracy (Guaranteed accuracy range)

Standard accuracy : ±1 % of indicated value
(1/1 to 1/1000 of load cell capacity)
High accuracy : ±0.5% of indicated valeu (Optional)
(1/1 to 1/1000 of load cell capacity)
* Test machine must be in location free of vibration

Applicable standard

JIS B 7721 Class 1 or Class 0.5 and ISO7500-1 Class 1 or Class 0.5

Effective test width (Note 2) (mm)

600

600

420

430

Cross head stroke (mm)

1 550

1 350

1 015

1 090

Maximum mounting space (mm)

1 690

1 555

1 165

1 160

Tensile stroke (Note 3) (mm)

620

850

470

710

820

870

890

910

Crosshead speed

0.000 5 to 500 mm/min
0.1 to 500 mm/mincan be set in 0.1 mm/min incliments. Below this, can be set in 9 steps: 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001, and 0.0005.

0.000 5 to 1 000 mm/min
0.1 to 1 000 mm/min; can be set in
0.1 mm/min increments. Below this, can be set in 9 steps: 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001, and 0.0005.

Crosshead speed accuracy

±0.1 % over entire speed range

Return speed

Can be set as required between 0.1 mm/min and 750 mm/min

Can be set as required between 0.1 mm/min and 1 500 mm/min

Speed setting method

Manual: Numeric input via control panel
When using data processing software: Automatically set in accordance with test conditions created.

Manual speed

3 speeds (HIGH/MIDDLE/LOW); each freely settable

Test mode

Single and cycle (Combination of test force and position)
Optional: Creep, Automatic loading

Test force display

5 digit digital display ±99 999
Auto range: Resolution 1/5 000, test force reduction increase/decrease, full scale display, and automatic switching of decimal point position and display units
100 range: Resolution 1/10 000 * Test force display varies depending on the load cell provided.

Movable crosshead position display

6 1/2-digit digital display ±1999.999

Standard function

Options

External dimensions (WxHxD)(mm)

1420 x 2406 x 894

1221 x 2192 x 720

900 x 1507 x 490

700 x 1583 x 523

700 x 1 583 x 513
(without level adjuster)

Approximate weight (kg)

1 200

900

310

120

Power supply voltage, Frequency

3-phase AC200 V to 230 V+10 % to 15 %, 50/60 Hz

Single phase AC100 V to 115 V+10% to -15%, 50/60 Hz

Power consumption (W)

7.5 k

2.9 k

1.8 k

750

400

Operating temperature / humidity range

Temperature 5 ℃ ~ 40 ℃,
Humidity 20 % ~ 80 %RH (with no condensation)