Bộ ghi dữ liệu rung 3 chiều(chưa gồm phần mềm lấy dữ liệu) PCE-VDL1

Accelerometer with three-axis for G force by means of 3 axis / memory for 349.525 measurement values / interface / software to store measurement values / G force as the maximum acceleration in a predefined time / real time operation

The three-axis impact Accelerometer PCE-VDL 1 used to measure both impact and vibrations is a compact Accelerometer for G force with a high resolution and powered by batteries. This three-axis impact Accelerometer PCE-VDL 1 can be easily programmed through the software to the automatic registration of three-axis impact signals up to 500 g. The Accelerometer PCE-VDL 1 is able to measure and record G force as the peak acceleration during a period of time predefined by the user. Measurement values are stored in a non-volatile memory (349.525 measurement values in each axis). These values are available even after energy loss. Its housing is made of a compact layer of aluminium, so this instrument can be used under harsh conditions. Thanks to both its flexible adjustment and his compact housing, the Accelerometer PCE-VDL 1 is available for use in the control of transport of goods and valuable machinery. By means of the software, measurement values can be read and stored as well as being used for Accelerometer programming. The measurement quota can be adjusted (64 values per second up to one value every 5 minutes in the impact mode) to operate the Accelerometer.

- Storage capacity: 349.525 measurement values - Software for the analysis of data in a 
  PC or a portable computer (optional)
- Measurement quota (64 values per second up to one value every 5 minutes in the impact 
  mode)
- Interface velocity: 1 15,200 baud
- Measurement values can be easily exported to the MS Excel program
- accelerometer of G force powered by a battery. 
- Three axis measurement. 
- Programmable scaling factor, offset and unit
- Real time operation
- Measurement values can be easily exported to the MS Excel program
- Non-volatile memory
- Compact housing made of aluminium.

Technical Specifications

The projection and reading software can be used by inexperienced personnel. The user can select the measurement quote very easily and start with the measurement when the Accelerometer is connected to a PC.

Zoom function: With the mouse you will be able to increase or reduce the graphic easily. 

Statistics: maximum, minimum and average values, variations, etc … 

Real time operation: Presentation of measurement values in real time when values are simultaneously stored in your PC.

Printing: Values can be printed as a chart or as a graph.

User’s password: It can be programmed by means of the software or in the accelerometer itself to avoid entering without permission. 

Automatic scale: The automatic scale can be activated or deactivated. 

Calibration: Automatic calibration in the software and storage of parameters in the accelerometer. 

Exportation of data: All data can be exported to other programs such as MS Excel 
(with just a click)

Every physical unit (up to 10 signs) can be programmed through the software and this is stored in the instrument.

Delivery contents:

1 x Accelerometer PCE-VDL 1 for G force
1 x battery 
1 x user’s manual