PCE-VT 1100 Accelerometer
pocket vibration analyzer to measure vibration
velocity in machines and installations
The PCE-VT 1100 accelerometer is designed for the preventive or rather precautionary maintenance of production machines. The PCE-VT 1100 accelerometer is established for quick measurements of an imbalance and the examination of bearings and gears. It also is frequently used to evaluate the state of small electronic motors. In the following section, you will find classifications of the values obtained with the PCE-VT 1100 accelerometer.
- measures vibration velocity
- keeps the value after every measurement.
- easy to handle, powered by batteries
- wide frequency range
- automatic shut-down after 2 minutes of
inactivity to protect battery life
- low battery indicator
Classification of results (ISO 2372)
Attention (the classes refer to):
class I (small motors up to 15 kW),
class II (medium electronic motors up to 75 kW),
class III (large electronic motors with stator stable) y
class IV (large motors with bearing / stator oscillating).
These results are taken from at least 3 measurements on 3 axes.
Range of Measurement acceleration
Range of Measurement speed
Range of Measurement displacement
0,01 ... 199,9 m/s² peak
0,01 ... 199,9 mm/s rms
0,001 ... 1,999 mm p-p
±5 %, ±2 Digits (20 Hz ... 1 KHz)
±10 %, ±2 Digits (10 Hz ... 20 Hz)
Frequency Range acceleration
Frequency Range speed
Frequency Range displacement
10 Hz ... 1 kHz
10 Hz ... 1 kHz
10 Hz ... 500 Hz
1 x PCE-VT 1100 accelerometer
1 x carrying case
2 x batteries
1 x factory certificate
1 x user’s manual
Tags: máy đo rung, thiết bị đo rung , vibration measurement
Libero velit id eaque ex quae laboriosam nulla optio doloribus! Perspiciatis, libero, neque, perferendis at nisi optio dolor!