Eco-Power Meter Panasonic KW9M

0₫

Nhà Sản Xuất Panasonic
Mã Sản Phẩm KW9M

Mô tả
Bình luận

Đồng hồ đo điện năng Panasonic KW9M

Panasonic đã phát triển ra thị trường dòng sản phẩm KW9M – đồng hồ đo điện mới giá cả rất hợp lý.

Màn hình LCD lớn với đèn nền hiển thị rõ ràng theo 4 dòng

Độ chính xác cao! Hiển thị cập nhật thay đổi từng 0.1 giây

Class 1 (IEC62053-21)

Large-screen LCD with backlight clearly displays values in four lines

he total and individual power values of each phase are displayed on one screen, enabling you to check the phase balance at a glance.

The data is useful for power quality checks and power factor improvements.
(Line voltage, Phase voltage, Current, Power factor, Active/Apparent/Reactive power)

Panel-mount type capable of multi-circuit measurement

Capable of displaying small currents of 1 mA or above

This allows for the monitoring of standby power consumption, which helps energy saving.

Regenerative power can also be measured by one KW9M Eco-POWER METER.

Bidirectional integrated electric power of each circuit can be measured.

A maximum of 66 kV high voltage power supply can also be measured by using VT.

Compatible with AC/DC operating power supply

Capable of measuring power (primary side) of inverter-controlled equipment, which is susceptible to harmonic effects.

Ideal for measuring inverter power for large equipment, lighting, etc.

Data can be made visualization by connecting the meter to DLL* and logging the data.

The RS485 port is isolated for safe use. Up to 99 KW9M units can be connected.
*DLL is the abbreviation for Data Logger Light.

*	KW Watcher cannot simultaneously display values of three phases in graphs. (Up to two graphs for comparison can be displayed.)
*	For specifications of KR20 Wireless Unit and DLL, please refer to the individual catalogs.

You can measure power with a direct connection to an already-installed large-capacity general-purpose CT (secondary side 1 A / 5 A type).

* The dedicated CT for Eco-Power Meter cannot be used. Use a CT with a secondary side current of 1 A / 5 A.

The measuring accuracy of the Eco-POWER METER does not take the CT error into account. Other Eco-POWER METER series need to use two CTs for measurement. KW9M is ready for direct input from only one CT, allowing higher accuracy measurements than with other Eco-POWER METER series.

You can measure power with a direct connection to an already-installed large-capacity general-purpose CT (secondary side 1 A / 5 A type).

Free visualization software for supporting energy management

Power consumption analysis enhances equipment operation efficiency.

Mô tả

Đồng hồ đo điện năng Panasonic KW9M

Panasonic đã phát triển ra thị trường dòng sản phẩm KW9M – đồng hồ đo điện mới giá cả rất hợp lý.

Màn hình LCD lớn với đèn nền hiển thị rõ ràng theo 4 dòng

Độ chính xác cao! Hiển thị cập nhật thay đổi từng 0.1 giây

Class 1 (IEC62053-21)

he total and individual power values of each phase are displayed on one screen, enabling you to check the phase balance at a glance.

The data is useful for power quality checks and power factor improvements.
(Line voltage, Phase voltage, Current, Power factor, Active/Apparent/Reactive power)

Panel-mount type capable of multi-circuit measurement

Capable of displaying small currents of 1 mA or above

This allows for the monitoring of standby power consumption, which helps energy saving.

Regenerative power can also be measured by one KW9M Eco-POWER METER.

Bidirectional integrated electric power of each circuit can be measured.

A maximum of 66 kV high voltage power supply can also be measured by using VT.

Compatible with AC/DC operating power supply

Capable of measuring power (primary side) of inverter-controlled equipment, which is susceptible to harmonic effects.

Ideal for measuring inverter power for large equipment, lighting, etc.

Data can be made visualization by connecting the meter to DLL* and logging the data.

The RS485 port is isolated for safe use. Up to 99 KW9M units can be connected.
*DLL is the abbreviation for Data Logger Light.

*	KW Watcher cannot simultaneously display values of three phases in graphs. (Up to two graphs for comparison can be displayed.)
*	For specifications of KR20 Wireless Unit and DLL, please refer to the individual catalogs.

You can measure power with a direct connection to an already-installed large-capacity general-purpose CT (secondary side 1 A / 5 A type).

* The dedicated CT for Eco-Power Meter cannot be used. Use a CT with a secondary side current of 1 A / 5 A.

You can measure power with a direct connection to an already-installed large-capacity general-purpose CT (secondary side 1 A / 5 A type).

Free visualization software for supporting energy management

Power consumption analysis enhances equipment operation efficiency.

Free visualization software for supporting energy management

DANH MỤC SẢN PHẨM

Eco-Power Meter Panasonic KW9M

Màn hình LCD lớn với đèn nền hiển thị rõ ràng theo 4 dòng

he total and individual power values of each phase are displayed on one screen, enabling you to check the phase balance at a glance.

Panel-mount type capable of multi-circuit measurement

Capable of displaying small currents of 1 mA or above

Regenerative power can also be measured by one KW9M Eco-POWER METER.

A maximum of 66 kV high voltage power supply can also be measured by using VT.

Compatible with AC/DC operating power supply

Capable of measuring power (primary side) of inverter-controlled equipment, which is susceptible to harmonic effects.

Data can be made visualization by connecting the meter to DLL* and logging the data.

You can measure power with a direct connection to an already-installed large-capacity general-purpose CT (secondary side 1 A / 5 A type).

Free visualization software for supporting energy management

Mô tả

Màn hình LCD lớn với đèn nền hiển thị rõ ràng theo 4 dòng

he total and individual power values of each phase are displayed on one screen, enabling you to check the phase balance at a glance.

Panel-mount type capable of multi-circuit measurement

Capable of displaying small currents of 1 mA or above

Regenerative power can also be measured by one KW9M Eco-POWER METER.

A maximum of 66 kV high voltage power supply can also be measured by using VT.

Compatible with AC/DC operating power supply

Capable of measuring power (primary side) of inverter-controlled equipment, which is susceptible to harmonic effects.

Data can be made visualization by connecting the meter to DLL* and logging the data.

You can measure power with a direct connection to an already-installed large-capacity general-purpose CT (secondary side 1 A / 5 A type).

Free visualization software for supporting energy management

Bình luận

Pink Printed Dress