Moisture - Dryness Content 0 ... 100 % / resolution 0.01 % /
Weighing range of 0 ... 50 / resolution 0.001 g /
bargraph display / RS-232-interface and optional software
|
The absolute moisture meter is a precision device for the determination of moisture content in small samples of materials by drying the sample with halogen heaters. The absolute humidity meter is in use as a moisture measurement tool as well as for determination of dryness content. Also it can work as a standard mg-balance. The absolute humidity meter uses heaters (2 x 200 Watts) to dry the sample in conjunction with a precision balance to measure the minute changes in weight as the sample dries. In general these units can be used in research, development and quality control. The materials to be tested are: food, sugar, salt, granulates, plastics, pellets, fibers, and also liquids as sludge and mixtures of all kinds. So the absolute humidity meter is a multi purpose tool.
The software built into the system provides many different drying programmes and calculates various parameters for humidity and dry mass. A typical drying procedure involves choosing a drying temperature, a time interval - for example 100 degrees for 10 minutes- and a mode - % solids. Automatic external calibration using either 100 g or 200 g calibration weight (depending on the model) guarantees ongoing accurate results. The integrated RS - 232 - interface enables you (with optional software-kit) to automatically send the moisture data into a sequence table.
|
- External calibration
- Date and time
- Backlit LCD with dual display / Capacity tracker
- Multilingual display (English, German, French, Spanish, Italian, Russian, Polish ...)
- Memory for temperature correction for 9types of sample(user programmable)
- Memory for 160 drying sequences (user programmable)
- RS-232 bi-directional interface
- Calibration certificate (Option)
- Software-Kit (Option) |
Technical Data
|
Measurement
Weighing range
|
0 ... 100 % Absolute Moisture
|
0 ... 50 g
|
Maximum capacity
|
50 g
|
Readability |
0,01 %
0,001 g
|
Linearity |
± 0,1 g / OIML class II
|
Repeatability |
0.0015 g
|
Tare range
|
Full
|
Heating
|
2 quartz halogen heaters (200 W each)
|
Temperature range
|
+50 °C ... +160 °C in increments of 1 °C
|
Stabilisation time |
3 ... 5 s
|
Time setting / Sampling interval
|
2 min ... 9 h 59 min (in increments of 1 s)
|
Memory / Drying curve
|
160 (to memorize user programmable drying curves)
|
Work mode / Drying sequence
|
- Automatic (drying to constant weight)
- Semi-automatic (drying stops when loss
per unit of time goes below theoretical value)
- Manual (by preset time)
|
Interface |
RS-232 bi-directional interface
|
Display
|
Backlit with dual digits 34 mm (multilingual) and capacity tracker
|
Calibration
|
Automatic external calibration with optional weights (100 / 200 g)
|
Pan size |
Diameter 100 mm
|
Operating Temperature
|
+18 ... +30 °C
|
Power supply
|
240 V / 50 Hz
|
Housing
|
die cast aluminium
|
Protection
|
IP54
|
Overall dimensions
|
235 x 245 x 260 mm
|
Net weight
|
ca. 8 kg
|
Delivery includes
1 x Absolute humidity meter PCE-MB 50
1 x Mains plug
10 x Aluminium sample pans
1 x User manual (in required language: English, Russian, Italian, French, Spanish ...)
|
|
Options
- ISO Calibration (CAL-PCE-MB)
The calibration procedure includes the laboratory calibration process and ISO certification. The customer's name and address are included. These certificates are comparable to NIST and UKAS certificates. They are accepted all over the world.
- Software-Kit (PCE-SOFT-MB)
The kit includes a software for transferring weighing data to a PC or Portable and RS-232 cable. The transferred data can also be sent to other software such as Excel, etc. The standard software is in English (other languages are also available, such as French, German, etc).
- RS-232-USB-Adaptor (RS232-USB)
You can use this adaptor together with a standard RS-232-cable to connect to the USB port on your PC or laptop. Software (covering all the actual drives) is included.
- Printer (PCE-BP1)
The printer is used for direct output of weighing data. It will be delivered with RS-232-cable, USB cable, net adaptor and 1 roll of paper.
- thermal paper/paper width 112 mm
- 230 V/12 V Adaptor
- Paper (PCE-BP1-EP)
Replacement roll of paper for the thermal printer PCE-BP1
- paper width 112 mm
- 4 rolls in each packet
- Aluminium Sample Pans (PCE-MB-PS)
(Pack of 50) Can be used several times if it is not adhesive (after cleaning).
- Diameter: 100 mm
- Glass Fiber Filters (PCE-MB-GF)
(Pack of 100)
- Chemical resistant to most acids and alkalis.
- Usable for splashing materials