Máy đo độ ẩm tuyệt đối PCE-MMK 1

Absolute moisture meter for relative and absolute moisture / with external and internal insertion probes for wood, construction material and paper / manual temperature compensation / with adaptable lengthening / different material characteristics selectable 
 

The absolute moisture meter PCE-MMK 1 is designed for mobile use by technicians and assemblers in order to furnish opinions or to control received goods. The absolute moisture meter not only measures the absolute moisture in construction materials or wood, but can also display data regarding the atmospheric environment (air humidity and temperature). The display of the universal moisture meter immediately shows the reference value in %- values, thus no conversion is necessary. The delivery package of the universal moisture meter PCE-MMK 1 includes three different insertion probes for woods, construction material and paper- and board- staples. In general, the universal moisture meter is provided with four different measuring modes, which can be switched in accordance to the probe; 130 varying kinds of wood, 19 construction materials (cement, screed, mortar, concrete etc. …), a dry-wet-indicator for reference measurement and an index mode, with which absolute moisture can be measured. By means of the self-testing function the universal moisture meter can be tested for its correct work function. Furthermore, the universal moisture meter includes a manual temperature compensation mode to achieve more accurate measuring data. For further information about universal moisture meter, please read the following technical data. Our engineers and technicians will gladly advise you regarding the universal moisture meter PCE-MMK 1 or any other  products in terms of regulation and control, or scales and balances of PCE Instruments.
 

- Easy handling
- Self-test of universal moisture meter
- wood, board paper and construction material  
- Battery display
- Wet-dry-indicator
- Temperature unit eligible between °C and °F
- Resistive Measuring 

- Type of wood and building material adjustable
- 3 different electrodes included in delivery
- Short and long insertion needles adaptable
- Temperature and moisture measurable
- Max- and Min- value preserved
- Manual temperature compensation
- Internal and external electrode

Technical Specification on the Absolute Moisture Meter
 

Measuring ranges

Wood:             1 ... 75 %
Material:          0.1 ... 2.4 %
Temperature:   -40 °C ... +70 °C / -40 ... +158 °F
Humidity:         0 ... 100 %

Resolution

0.1 %

Accuracies

Wood:            1 ... 30 % / ±1 %
                     31 ... 60 % / ±2 %
                     61 ... 75 % / ±4 %
Materials:      ±0.5 %
Temperature: -40 ... -10 °C, +40 ...+70 °C / ±2 °C
                    -10 ... +40 °C / ±1 °C
Humidity:        0 ... 20 %, 80 ... 100 % / ±5 %
                     20 ... 80 % / ±3.5 %

Electrode length

8 mm (internal), 30 mm und 150 mm (external)

Measuring principle

electrical resistance

Automatic turning-off function

after about 3 minutes (without using)

Automatic turning-off function (Display)

after about 10 seconds (without using) 

Enclosure

Plastic, impact resistant

Battery

3 x CR 2032

Surrounding conditions

0 ... +40 °C, 0 ... 85 % RH

Measures

139 x 47 x 25 mm

Weight

100g (without electrode)

Delivery Content of Absolute Moisture Meter
 

1 x absolute moisture meter PCE-MMK1

1 x measuring cap for self-test

1 x measuring cap for external electrode

1 x ramming electrode

1 x penetration electrode

1 x piling electrode

2 x 30 mm needles

2 x 150 mm measuring tips

2 x 300 mm lengthening

1 x instruction manual