Máy đo tốc độ và chiều hướng gió PCE-WL 2(cảm biến)

Air Flow Meter PCE-WL 2
suited for stationary or mobile measurements / data memory on SD cards / wind direction sensor / wind speed sensor / battery powered / internal temperature sensor

The Air Flow Meter PCE-WL 2 is used to measure current wind situation before starting wind energy plants. The Air Flow Meter saves measured data for wind direction and wind speed on a SD memory card. After measuring the data can be evaluated on a PC. The casing is weather resistant and protected according to IP65. The cable of the Air Flow Meter PCE-WL 2 will be connected via screwed connections. The Air Flow Meter is measuring velocities up to 40 m/s and wind directions over a range from 2.5 º - 357,5 º. The Air Flow Meter is equipped with low wear reed relays that ensure a long life-time. Optionally, the Air Flow Meter PCE-WL 2 is able to be equipped with a display. This display shows measured results of wind direction and velocity immediately.

Technical Specification Air Flow Meter PCE-WL 2

Data memory

SD/MMC card (FAT 16/32)

Voltage supply

2 x 1.5 V batteries, type C

Environmental temperature

-15 ... + 50 ºC

Inputs

1 x analogue input (wind direction)
2 x digital input (wind velocity)

Interface

RS232

Interval of memory

10 sec, 1 min or 10 min

Memory medium

SD memory card (max 2 GB)

Type of data

CSV data, ASCII

Casing

hard plastic casing

Protection standard

IP65

Dimensions

160 x 80 x 55 mm

Weight

450 g

Wind energy sensor
Wind energy- velocity sensor

Measuring range

1 ... 40 m/s

Sensor

2 reed contacts (zero potential)

Output

impulses zero potential

Resolution

2.3 Hz/ms^-1

Maximum applied load

10 VA, 0.5 A, 42 VDC

Wind energy wind direction sensor

Measuring range

2.5 ... 357.5 ºC

Sensor

0 ... 1 KΩ

Neutral position

5 º open to north

Wind energy sensor general technical data

Dimensions

418 x 30 mm

Mast support

31 x 26 mm

Protection standard

IP54

Weight

1 kg

Delivery Content