Máy đo tốc độ vòng quay Onosokki FT-2500

Input section

Applicable sensor

FT-0501, IP-292/296, IP-3000A/3100, VP-202/1220, OM-1500/1200
Constant Current Line Drive sensors, microphones, accelerometers and so on.

Measurement section

Measurement mode

1．Steady rotation measurement mode
　　・Frequency range: 500 Hz, 2 kHz, 10 kHz
　　・Resolution ＝Frequency range ÷ 12800 × 60 ÷set pulse count

2．Rotation acceleration/deceleration measurement mode
　　・Frequency range: 250 Hz, 500 Hz, 2 kHz
　　・Resolution＝Frequency range ÷ 6400 × 60 ÷set pulse count

Rotating direction acknowledgment

Available when FT-0501 is in use.

Measurement accuracy

±2 x rotating speed resolution ±1 count

Averaging processing

Moving average processing, allowable count: OFF, 2, 4, 8, 16

Filter function

Can be set voluntary (Specifying each one of upper and lower rotating speeds.)

Display section

Display update time

0.5 ±0.2 second

Measurement display range

0 to 999,999 r/min（0 to 10,000 Hz）

Output section

Analog output voltage range

0 to 10 V/0 to F.S.
Rotational speed can be specified voluntary at 10 V output.

Analog output update time

Steady rotation measurement mode: 500 ms or less
Rotation acceleration/deceleration mode: 250 ms or less

Sensor signal output for monitoring

Sensor signal output for monitoring
(The output can be selectable from analog or monitor output.)

Comparator output

Upper/lower-limit determination, rotating direction acknowledgment, OK determination
Output method: semiconductor relay (3 circuits are built-in.)

Pulse output

Output the frequency equivalent to the displayed rotational speed x set P/R
（Hi: 4.5 V or more, Lo: 1 V or more）

External interface

RS-232C, External command input connector, Ethernet (option)

Memory section

Condition memory

Saving 3 kinds of setting conditions.

General specifications

Power requirement

100 to 240 VAC（50/60 Hz）

Power consumption

32 A or less

Operating temperature range

0 to ＋40 °C

Storage temperature range

-10 to ＋55 °C

Outer dimensions

144(W) × 72(H) × 180(D) mm

Weight

Approx. 1.2 kg

Accessories

Panel mounting fixture, stand foot, rubber foot, connector (D-SUB <15-pin, plug>), Power cable (3P-3P, 1.9-m) .......... (1 pc. for each)

Option

AX-5022 RS-232C cable

FT-0100 Analog output cabel(1.5m R03PB3M-BNC245)

FT-0110 Pulse output cabel(1.5m D-SUB15PIN-BNC245)

FT-0251 Ethernet communication function (RS-232C function cannot be used when Ethernet option is equipped.)