Sesame Electronic Instant Brake

0₫

Nhà Sản Xuất Sesame - Taiwan
Mã Sản Phẩm Electronic Instant Brake

．Operating Frequency and Limitation
Electronic Instant Brake, could be used for inch movement, a rise in temperature would result from frequent start-stop action of the motor. Please suspend operation temporally if the surface temperature of the motor exceeds 90℃.
．Braking Principles
Electronic brake circuit is design to introduce pulsated direct current rectified by the half wave into motor, to produce directional magnetic field and stop the motor instantly.
．Service Life
Hence it is electronic brake, there no fiction created between parts, therefore it will extend its lifespan.

Insulating Resistance: Tested value at 10MΩ and above, measured by DC 500V Hi-Resistance meter between the coil and housing.
Hi-Pot Resistance: No damages caused after 1kV at 60Hz was tested for noe minute between the coil and housing.

Selection of External Resistance:

Output 6W~25W: External resistance 20W/ 20Ω. (Model: DDR20W20ΩJ)
In frequent braking situation, temperature of external resistance would be very high. Please use external resistance 30W20Ω. (Model: DDR 30W20ΩJ)
Output 40W~90W: External resistance 50W/ 50Ω. (Model: DDR50W50ΩJ)
In frequent braking situation, temperature of external resistance would be very high. Please use external resistance 80W50Ω. (Model: DDR 80W50ΩJ)

．Operating Frequency and Limitation
Electronic Instant Brake, could be used for inch movement, a rise in temperature would result from frequent start-stop action of the motor. Please suspend operation temporally if the surface temperature of the motor exceeds 90℃.
．Braking Principles
Electronic brake circuit is design to introduce pulsated direct current rectified by the half wave into motor, to produce directional magnetic field and stop the motor instantly.
．Service Life
Hence it is electronic brake, there no fiction created between parts, therefore it will extend its lifespan.

Insulating Resistance: Tested value at 10MΩ and above, measured by DC 500V Hi-Resistance meter between the coil and housing.
Hi-Pot Resistance: No damages caused after 1kV at 60Hz was tested for noe minute between the coil and housing.

Output 6W~25W: External resistance 20W/ 20Ω. (Model: DDR20W20ΩJ)
In frequent braking situation, temperature of external resistance would be very high. Please use external resistance 30W20Ω. (Model: DDR 30W20ΩJ)
Output 40W~90W: External resistance 50W/ 50Ω. (Model: DDR50W50ΩJ)
In frequent braking situation, temperature of external resistance would be very high. Please use external resistance 80W50Ω. (Model: DDR 80W50ΩJ)