Thiết bị đo lực xoắn siết Cedar DI-1M-IP500
Model : DI-1M-IP500
Hãng sản xuất: Cedar
Thông số kỹ thuật:
Specification
DI-1M-IP50
DI-1M-IP200
DI-1M-IP500
Measuring range (at the time of Track)
0.30~50 N・m 3.0~500 kgf・cm 3.0~430 lbf・in
3.0~200 N・m 30~2000 kgf・cm 30~1800 lbf・in
3.0~500 N・m 30~5000 kgf・cm 30~4500 lbf・in
Peak down Operating range
0.70N・m~, 7.0kgf・cm/ lbf・in~
7.0N・m~, 70kgf・cm/ lbf・in~
Accuracy
±0.5%(499 or less digit±3digit)
Display
The 4 figures digital display of LED
The measurement direction
CW-CCW (right and left)
Measuring mode
P-P Peak
Peak load value hold
T-R Track
Indication of real time torque value.
P-D Peak down
Indication peak down point and hold.
Display zero clearance
Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow
Measurement range
Zero to 99 blow
Measurement time
0.1 - 9.9 seconds
Data output
ASCII format (baud rate 19200)
Power supply
Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save
5 minutes no use, automatically switch off.
Charging time
about 3hours
Continunous working time
8 hours
Meter part Weight
About 600g
Detection part Weight
about 600g
about 1kg
about 2.5kg
Meter part Outside size
146(W)×115(D)×48(H) (It does not contain by the projection part)
Code length
Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)
Carrying case
―
AC/DC adaptor
An inspection report, a proofreading certificate, traceability system figure
Tags: Thiết Bị Đo Lực, Mô Men Xoắn
Libero velit id eaque ex quae laboriosam nulla optio doloribus! Perspiciatis, libero, neque, perferendis at nisi optio dolor!