Thiết bị đo tĩnh điện Kasuga KSD-0110
Model: KSD-0110
Hãng sản xuất: Kasuga
Thông số kỹ thuật:
Storage functions: + Supported media: SD card with a maximum capacity of 32 GB (Class 10 recommended), FAT32
+ Data format: .csv (one file to be added for each of the six time slots into which 24 hours are divided)
Power supply: 100 V to 240 V AC, 50/60 Hz
Power consumption: 15 VA (at maximum)
Ambient temperature and humidity: 0 to 40 degrees centigrade, 65% Rh or less (no condensation)
Display ranges: + KS-2001 0~±20.0kV/0~±50.0kV
+ KS-2001A 0~±20.0kV
+ KS-2100 0~±2000V/0~±20.0kV
Measurement precision: ±10% of Reading
Number of channels: 2 (at maximum)
Measurement cycles: 100ms、500ms、1000ms(1s)
Analog output:
+ Voltage: 0 to ± 200 mV / 0 to ± 500 mV (when the 50 kV range is selected)
+ Current: 4 mA to 20 mA
Number of alarm settings: + Up to two settings on each channel
+ (The preset value depends on the measurement range setting on each channel.)
Alarm records: The last 10 alarms displayed on the alarm summary screen (cleared once the power is turned off)
Alarm output: Relay contact output at the occurrence of an alarm (individual settings and channels are independent)
Monitor signal during setting: Relay contact output during setting (output produced during the RUN indication)
Sensor error signal: Relay contact output during the output of a sensor error signal (for the KS-2100 only)
External measurement control signal: Measurement enabled or disabled by dry contact signal control from outside
Relay for control output: Contact capacity: 250 V AC and 5 A / 30 V DC and 5 A, Output type 1a
Display functions: A 4.3-inch TFT liquid crystal panel with touchscreen functions
Display languages: apanese, English and Chinese (simplified or traditional)
Grounding: Type A grounding
Dust: 0.1 mg or less per m3 (free of conductive dust)
Place of use: Safe indoor spaces
Mass: Approx. 3.0 kg (excluding the sensor and the safety barrier)
Tags: Máy đo điện trở bề mặt, điện trở khối, Máy đo tĩnh điện, Thiết bị khử (giảm) tĩnh điện