Tủ sấy Koyo Thermo KLO-30NH

A high-temperature oven running at a maximum of 600°C
Temperature falling time reduction by a cooling blower
300 ppm or lower residual O2 concentrations
Uniform furnace internal temperature by the use of a forced circulation system
Reduction of area by 47%, and volume by 37% compared with our INH-9CD

Method

Convection

Max. operation Temperature(*1)

600°C

Normal operation Temperature(*1)

RT+40~600°C

Temperature distribution (Reference)(*2)

±8°C(at 600°C)

Heat up time (Reference)(*1)

Within 60 minutes (RT+40~600°C)

Control System

Programmed controller

Cooling mechanism

Lateral cistem (Supply port: Φ50)
Door seal (Supply port: Φ30)

Shelf plate withstand
(Uniformly-distributed load)

5kg/1 sheet

Chamber pressure meter

0~2kPa

Outer dimension (mm)

610(W)×1300(H)×725(D)

Inside dimension (mm)

300(W)×300(H)×300(D)

Thermocouple

K

Exhaust port

1B · ball value

Equipment weight

a0pprox. 200kg

Breaker capacity

AC200V 40A 1ø50/60Hz

Safety feature

Thermocouple disconnection
Over-heat Protection,
Earth Leakage Breaker
Motor over-load protection

Standard accessory

2 shelves (with shelf plates),
Supply cable (4m)

(*1) Temperature at the control point within the heating chamber.
(*2) Valid dimension is two-thirds inside dimension.
☆ Thermocouples are consumable items.